【Introduction】:The high pressure suspension mill is widely used in mining, metallurgy, chemical engineering, building materials to grind finely more than 280 kinds of material with Mohs hardness less than 9.3 and the moisture content below 6%, such as barite, limestone, Ceramic and slag. The granularity of finished product is controlled between 80 and 425 meshes (the minimum is 1000 meshes) And it can product 30-80 meshes coarse powder by adding some special equipment.
We're here to help:Easy ways to get the answers you need.
|Model||No. of Roller (Pcs)||Grinding Roller Size (R×H) mm||Grinding ringinner diameter and height(mm)||Max.feed size (mm)||Finished size (mu)||Capacity (t/h)||MotorPower (kw)||Overall Dimension L×W×H (m)|
(1) Our patent product
(2) Product size is adjustable in the range of 80 - 425 meshes
(3)Better design, low cost
The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.