【Introduction】:Raymond Mill widely used in minerals materials grinding processing in metallurgy, building materials, chemicals, mining minerals and other field. Suitable for processing various non-flammable mineral which is below 7 Mohs hardness, moisture below 6%, Such as limestone, calcite, calcium carbonate, dolomite, barite, talc, gypsum, diabase, quartz, bentonite, bauxite, iron ore, etc. Fineness is between 613 microns and 44 microns (0.613mm-0.044mm), By analytical machine and draught fan interaction, which can meet different users requirements.
We're here to help:Easy ways to get the answers you need.
|Model||No.of Roller (Pcs)||Grinding Roller Size (R×H) mm||Grinding ring inner diameter and height (mm)||Max. feed size (mm)||Finished size(um)||Capacity (t/h)||Motor Power (kw)||Overall Dimension L ×W×H(mm)|
(1) Our patent product
(2) Product size is adjustable in the range of 80 - 425 meshes
(3)Better design, low cost
The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.