【Introduction】:5X Vertical Shaft Impact crusher is our company’s latest product comprehensively upgraded from previous VSI crusher. It is absorbing clients’ feedback and suggestions, applying newest design concept and the most advanced processing technology.
5X Vertical Shaft Impact crusher keeps original rock-on-rock principle of vertical shaft crusher. It has advantages of high crushing ratio and good cubic shape of finished products. Application of lastest deep rotor technology increases the production ulteriorly and decreases the unit spare parts & energy cost. Optimized design of layout of spare parts increases the utilization ratio of spare parts and provides more efficient protection for crusher body. Key parts are made of advanced cemented carbide. Humanized design enables convenient operation and maintenance.
We're here to help:Easy ways to get the answers you need.
|Capacity (t/h)||Cascade and Center Feeding||150～280||240～380||350～540||500～640|
|Max. Feed Size (mm)||Soft Material||35||40||45||50|
|Rotation Speed (r/min)||1700～1900||1500～1700||1300～1510||1100～1310|
|Power of the Double Motors (Kw)||110～150||180～220||260～320||400～440|
|Overall dimension L×W×H (mm)||4100×2330×2300||4140×2500×2700||4560×2600×2900||5100×2790×3320|
|Thin oil lubrication station||Power of Double Oil Pump||2×0.25Kw|
|Power of Oil-Box Heater||2Kw|
|Overall dimension L×W×H (mm)||820×520×1270|
|Lubricating system parameter:|
|Oil box volume (L)||Rated pressure (Mpa)||Flow capacity (L/min)||Power (kw)||Cooling water consumption (m3/h)||Electrical heating voltage (V)||Medium|
|240||0.63||8||0.31||≥1.2||220||Bearing oil 32-46#|
1.The success of 5X Vertical Shaft Impact crusher to the application of new technology for its deep rotor.
2.The port height of deep rotor is about 50% bigger than that of normal rotor, which means there is a bigger space between distributor and feed eye ring, as well as between the upper and lower wearing plates.
3.With the increased space inside the rotor, more materials can be fed into the rotor, the rotor throughput increases about 30% (sometimes even more).
4.As there is more space in the rotor, materials are shot from the rotor more smoothly, with little throttle between the upper and lower wearing plate. Therefore, when the materials enter the rotor, there is less wear on the upper and lower wearing plates. The lifetime of these wearing parts increase about 30%-50%.
5.This also means less downtime, and higher crusher availability.
In Centrifugal impact crusher, material of high speed is crushed by self-broken mutual friction. Centrifugal impact crusher can not only crush but also shape stones.
According to feeding method, centrifugal impact crusher working form is divided into central feeding and central with cascade feeding. The crush form is divided into "rock on rock' and "rock on iron" According to material compressive strength, abradability. There are four working forms: central with cascade feeding "rock on rock" and rock on iron"; central feeding "rock on rock" and rock on iron".